CRUZ Airo Fuse black aluminium roof bars with fitting kit 6509
£155.00
In stock
CRUZ Airo Fuse are 'flush' aluminium T-track bars; it's only the bar length between the feet that can be used for load carrying, so be sure that they'll be long enough for what you want to carry.
They're designed to look good on the latest car styles, with low profile feet, and the adapter kits (which are also priced relatively very cheaply) include rubber gaiters to hide the fittings.
For even better value they are sold in single units because most cars now taper from front to back (they're wider at the front) and you may be able to reuse at least one bar when you change car.
CRUZ Airo Fuse are 'flush' aluminium T-track bars; it's only the bar length between the feet that can be used for load carrying, so be sure that they'll be long enough for what you want to carry.
They're designed to look good on the latest car styles, with low profile feet, and the adapter kits (which are also priced relatively very cheaply) include rubber gaiters to hide the fittings.
For even better value they are sold in single units because most cars now taper from front to back (they're wider at the front) and you may be able to reuse at least one bar when you change car.
We're really impressed with the new Airo Fuse roof bar system. It's good looking, smartly designed, well-engineered, strong (the load limit is 75kg, depending on the vehicle), easy to use, and very good value for money. The downside for many of our customers is that these bars may not be long enough to carry what you want. They'll probably be OK if you just want to carry a roof box, or up to 3 bike carriers, but they're likely to be too short for a box and a bike carrier, or for 4 bike carriers. This is because they are flush bars, sometimes called closed end bars, or OEM-style bars; only the bar length between the feet can be used for load carrying. If you need longer bars, to carry more, then please have a look at the CRUZ OptiPLUS bars, also available with the Airo aluminium profile. The aluminium section in the front bar is 98cm long, and in the rear bar it's 90cm long, but the useable length, between the feet, is considerably less than the bar lengths. It will vary between 73.5cm and 78.5cm for the front bar, and 66cm and 71cm for the rear bar, depending on the width between the fixpoints or flush rails for specific vehicles. We will provide information about precise measurements for specific vehicles as and when we get information from our own tests and from our customers. This is a modular system - it consists of (1) two bars, supplied as two single units because many cars are significantly wider at the front than the back, so the rear bar is usually shorter than the front bar; (2) a vehicle specific fitting kit to join the bars to the roof. The two bars, and the fitting kit, have been pre-ticked in the list below. (3) Locks are also available, also very good value; tick them if you want them. CRUZ Airo Fuse use their aluminium 'Airo' profile. Aerofoil-shaped roof bars were developed by Whispbar (now called Yakima) and similarly shaped bars are now also used by CRUZ, Atera and Thule. As well as being massively quieter than rectangular steel bars, aerofoil bars generate less drag and therefore help to reduce fuel consumption. Other features:
CRUZ Airo Fuse roof bar systems are fully TÜV approved and have a 3 year guarantee. Please note that CRUZ adapter kits will only work with CRUZ roof bars. Please also note that any brand and model of roof box, bike carrier, water sports or ski carrier can be fitted to CRUZ bars, if it has suitable fittings; more information is provided on individual product pages. Cruzber is Spain’s largest roof bar and roof rack manufacturer, founded in 1963. It sells most of its products under the CRUZ brand label, operating from over 145,000 square feet of modern premises and using state of the art manufacturing machinery. Cruzber is highly regarded in the European market in particular, for its quality and its innovation, and is now also gaining market share in e.g. Australasian markets. We have no doubt that CRUZ branded roof bars are the best made and overall best value in the mid-market. |
The aim of this note is to persuade you that kayaks should always be tied to the carrying vehicle at both bow and stern. Untied kayaks have, in our experience, the greatest potential for a roof bar or kayak carrier failure. The massive forces that untied kayaks can generate have even been known to snap roof bar fixing bolts with the result that a complete assembly of roof bars and kayaks has ended up on the road. We know that this has happened with almost every brand of roof bar, and regardless of whether the kayaks are on a special carrier or just strapped to the bars. You need to fix bow and stern lines, probably using the front and rear screw-in towing eyes to get strong and accessible fixing points on the vehicle. Kayak shops should be able to provide suitable 'paracord' for this purpose. Alternatively, we have sets of straps available that are perfect for the job and are really easy to use. Yakima make some excellent Bow/Stern tie down straps and Thule makes the QuickDraw 838 which we have listed together with every kayak carrier we sell. Please note that kayaks should be strapped to the roof bars, or to kayak carriers, using straps that are suitable for the purpose, e.g. 25mm polypropylene straps with strong buckles. Bungee cords must never be used. Please also note that all roof bar instructions point out the dangers of carrying unsecured long items, as of course do all kayak carrier instructions. If you tie down your kayaks properly you almost certainly won't experience a product failure. If you don't you may or may not get away with it. If there is a disaster and the kayaks end up on the road, separated from the vehicle, then you were not using tie downs and you have subjected the roof bars to forces for which they were not designed. The costs of sorting this out are yours, not ours, and you may also have difficulties with your insurers. We're sorry to be so firm about this, but "things coming off the tops of cars" is the stuff of nightmares, and we want to do all we can to prevent accidents of this sort from happening. |
Delivery charges and arrangements:We charge a contribution towards delivery costs, depending on what you order, where you live, and how quickly you want the goods. These are our standard charges; there are usually surcharges for all offshore destinations and some remote postcodes - for details please see our delivery information page.
Delivery of other items
Delivery timesDelivery times are calculated in working days (Monday to Friday, excluding Bank holidays). Cut-off times for Express Delivery orders
Delivery FAQsWhen will my order arrive? What about Next Working Day delivery? Is my delivery day guaranteed? Do I need to be at home? Payment options:We take the following cards, and also PayPal. Please note that the entry on your card statement will be from "The Roof Box Company". ![]() Secure paymentsOur website is secured by Sectigo (formerly Comodo CA), the largest commercial Certificate Authority in the world. ![]() ![]() |
Roof top tents should not be fitted to these bars!Roof top tents are becoming increasingly popular, but we advise they should not be carried on the flush type of roof bars. Roof top tents should only be carried on through bars, the type of roof bars where the cross bars stick out beyond the feet. There are concerns for both safety and damage if flush bars are used. Flush roof bars have a plastic-covered foot at each end of the bar. Even if the cross bar part is wide enough for the roof top tent to be fitted, the tent will certainly be wider than the bars and the weight of a person pressing down on the raised foot can damage the plastic parts. From a safety perspective, the base of the tent is unlikely to be touching the cross bars, so it will be difficult to tighten the fixings correctly, and the fixings of some tents can loosen when people are in the tent, and it flexes. Full size platforms such as the Thule Caprock and the Yakima LockNLoad platform should also not be used on flush roof bars; they tend to be heavily loaded, and to be walked on. This is an easy problem to solve; please choose a pair of through bars - the type of roof bars where the cross bars stick out beyond the feet. |
We sell returns at very cheap prices, often less than cost if they're ex Hire or damaged. Each of these items is offered with the full guarantee as if it had been purchased new, unless we state otherwise.